Bundled Is Not Enough When the Cable Also Needs to Stay Put

In panel wiring, machinery installations, and structured cabling environments, bundling cables together is only half the job. A bundle that is not anchored to a surface can shift, sag, and work its way out of position under vibration, thermal expansion, or the weight of the cable run itself. Saddle mounting ties are the solution to that second requirement, working together with a cable tie saddle or mounting base to create a fixed, surface-anchored cable management point that holds the bundle securely in position for the long term. Paprsky Saddle Mounting Ties provide the tensile strength, consistent width, and material durability to make that fixed anchor point reliable across the full service life of the installation.

What Are Saddle Mounting Ties?

Saddle mounting ties are cable ties specifically designed for use with cable tie saddles or mounting bases - fixed anchor components that are screwed or adhered to a panel, chassis, equipment frame, or structural support surface. The saddle tie threads through the saddle base and loops around the cable bundle, locking the bundle firmly against the mounting surface at a fixed point along the cable route. Unlike standard cable ties used in free-hanging or unsupported bundle applications, saddle mounting ties are selected for width and tensile properties that suit the mechanical demands of surface-anchored installation, where the tie must resist lateral movement, vibration, and sustained cable bundle weight at a fixed position.

Product Information

Paprsky Saddle Mounting Ties are available in two variants. The CT-PS-165SMT measures 165mm in length with a 7.5mm width, handling bundle diameters up to 33mm with a minimum loop tensile strength of 50LBS. The CT-PS-180MT measures 180mm in length with a 7.5mm width, handling bundle diameters up to 38mm at the same 50LBS tensile rating. Both variants share consistent width and tensile strength, making them interchangeable across saddle base types that suit the 7.5mm tie profile. The 50LBS minimum loop tensile rating across both variants provides reliable bundle retention for small to medium cable bundles on panel surfaces, equipment frames, and structural supports in electrical, industrial, and automotive applications.

Key Features 

• Designed specifically for use with cable tie saddles and mounting bases for surface-anchored cable routing
• 50LBS minimum loop tensile strength across both variants for reliable bundle retention at fixed mounting points
• 7.5mm consistent width suits standard saddle base profiles used across panel, chassis, and equipment frame installations
• Maintains cable alignment and prevents lateral shifting or bundle displacement under vibration and sustained load
• Two length variants covering bundle diameters up to 33mm and 38mm for small to medium cable bundle applications
• Durable material construction provides long-lasting performance across electrical, industrial, and automotive environments

Industrial and Professional Applications

• Electrical panel cable management for securing and anchoring wire bundles to panel frames and DIN rail structures at fixed routing points
• Machinery and equipment wiring for mounting cable bundles firmly against equipment bodies, conveyor frames, and automation panel surfaces
• Automotive and industrial wiring for anchoring harnesses and cable groups to chassis, bulkheads, and structural members at defined fixing positions
• Data, telecommunications, and structured wiring for securing cabling runs along equipment racks, frames, and wall-mounted containment surfaces
• Commercial and building equipment installations for clean, fixed cable routing on flat surfaces where bundle displacement is not acceptable

The Tie That Holds the Bundle and the Position

A cable tie that bundles without anchoring leaves half the job undone. Paprsky Saddle Mounting Ties complete both requirements in a single component - bundling the cable group firmly and anchoring it to the mounting surface through a compatible saddle base, with 50LBS tensile strength and a 7.5mm width profile that suits the saddle base types used across standard electrical, industrial, and automotive installations. Two size variants, consistent performance, and durable construction make these the practical choice wherever surface-mounted cable management needs to stay exactly where it is installed.

Explore the Full Range:

SADDLE MOUNTING TIES